[sdiy] Fat Controller slider pots

[Dave]

I remember the leg / lead spacing wasn't an exact match for the VS but it could be easily adapted. Before I would order again I would double check the lead spacing in the datasheet versus the PCB.

-Dave

On November 18, 2019 7:05:30 AM PST, Alex Sullivan <bloke at blokezero.com> wrote:
>Thanks Dave!
>
>I found this in AH:
>
>> I did order a slider from Mouser and works perfectly in my Fat
>Controller  :-)
>
>> 688-RS6011YA6009
>> (10K B taper)
>
>> Drew
>
>Alps part num.  RS6011YA6009 
>
>Which in the UK translates to:
>https://www.mouser.co.uk/ProductDetail/ALPS/RS6011YA6009?qs=%2Fha2pyFaduj0fS%252B07K%252BBF7W2a5FWToWUCMfgscMrvvlGmijUMezRew%3D%3D
>
>Cheers,
>
>Alex
>
>On Mon, 18 Nov 2019, at 14:55, Dave wrote:
>> I think i posted a replacement years ago. It may be in a post about
>the 
>> Prophet VS slider. I don't have time to search now - hope that helps.
>
>> 
>> -Dave
>> 
>> 
>> On November 18, 2019 2:47:57 AM PST, Alex Sullivan 
>> <bloke at blokezero.com> wrote: I got a couple of replacements years ago
>
>> but lost the details so I'm in the same boat - any information 
>> gratefully received!
>> > 
>> > Cheers,
>> > 
>> > Alex
>> > 
>> > On Sat, 16 Nov 2019, at 15:06, Mikael Kopimi Altemark wrote:
>> >> I am having trouble with at least two on mine, and have had it sat
>
>> >> shelved for a few years. If someone (Paul?) manages to help out
>I'd be 
>> >> very grateful as well
>> >> 
>> >> On Sat, Nov 16, 2019 at 3:49 PM Terje Winther 
>> >> <terje.winther at wintherstormer.no> wrote:
>> >>> Does anyone have specs - or even better a parts number - for
>slider pots replacement for the Frostwave Fat Controller sequencer?
>> >>>  I was so sure I had archived a previous posting on that, but am
>unable to find it, and archive search comes up with nothing.
>> >>>  One of my sliders seems to be dead.
>> >>> 
>> >>> 
>> >>>  Terje Winther
>> >>> terje.winther at wintherstormer.no
>> >>> http://wintherstormer.no/ Synth-diy mailing list
>> >>> Synth-diy at synth-diy.org
>> >>> http://synth-diy.org/mailman/listinfo/synth-diy
>> >>  
>> >>  
>> >>  -- 
>> >>  Allt gott / Best wishes,
>> >>  Mikael Altemark Synth-diy mailing list
>> >>  Synth-diy at synth-diy.org
>> >>  http://synth-diy.org/mailman/listinfo/synth-diy
>> >> 
>> > Synth-diy mailing list
>> > Synth-diy at synth-diy.org
>> > http://synth-diy.org/mailman/listinfo/synth-diy
>> >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20191118/5e711189/attachment.htm>