[sdiy] Handling MIDI Running Status from Power-up

[Next Expanse]

On Fri, Nov 15, 2019 at 8:40 AM chris <chris at chrismusic.de> wrote:

> Um, if you're receiving a stream of non-status bytes - how do you
> recognize message lengths...?
> (Apart from the lucky case of messages separated by time intervals of no
> activity, that is)


With the lucky case :-). My bet is you’ll be lucky more often than not, but
since this whole suggestion is totally out of spec, you’d have to try it
with a bunch of controllers and see what the optimum “byte is from the same
message” timer length ends up being.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20191115/2e1d8c98/attachment.htm>