[sdiy] Anyone alive?

Quincas Moreira quincas at gmail.com
Wed Jul 10 17:42:14 CEST 2019

Alive and bleeping! A bit busy with some film scoring, but getting back to
making SDIYG videos soon :)

On Wed, Jul 10, 2019 at 8:12 AM john slee <indigoid at oldcorollas.org> wrote:

> I am also still here. I was working on a PCB layout recently and finally
> got sufficiently frustrated at the effort involved in making a
> corresponding front panel that I decided to do something about it. I wrote
> a little command-line application that:
> 1. reads your Autodesk Eagle XML board files (only XML, not the older file
> format)
> 2. finds the board outline and determines what width Eurorack panel you
> need
> 3. looks for components with PANEL_DRILL_MM attributes and saves their
> names/locations/sizes
> 4. creates a new Eagle board file of appropriate Eurorack dimensions, with
> system holes, based on Dieter Doepfer's specs
> 5. adds holes and legend text to the generated board file
> From this point you can load the generated (front panel) board file into
> Eagle and use it to emit Gerbers.
> It was surprisingly easy to do! My real goal here was to have panel file
> generation be a step that can be quickly run again and again while working
> on a project — to eliminate the kinds of errors (eg. moving a pot slightly
> but forgetting to make a corresponding panel adjustment) I'd made
> previously when generating panel files manually with QCAD or Front Panel
> Designer. I think it worked out well. I ordered some boards from Seeed and
> when they arrived the only problems I found were where I had specified the
> wrong hole size!
> https://github.com/jsleeio/go-eagle
> Hopefully this is useful for other folks also.
> John
> On Wed, 10 Jul 2019 at 11:52, KA4HJH <ka4hjh at gmail.com> wrote:
>> No posts since June 30.
>> Terry Bowman, KA4HJH
>> "The Mac Doctor"
>> "By the end of Chuck Statler's 'Rock Videos' of Devo we agreed that even
>> if Devo did not take the stage it was still the best concert any of us had
>> ever attended." --Kim Thayil (Soundgarden), 1995
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy

[image: QMA]

Quincas Moreira
Director | QMA
mobile:  5534988825
site:  quincasmoreira.com
email:  quincas at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20190710/3cd726f7/attachment.htm>

More information about the Synth-diy mailing list