[sdiy] PCB manufacturing recommendation

[bbob]

I used to use Express PCB, but the cheapo PCB houses in China now are
significantly cheaper and reasonable quality.  Since your project has
published Gerber files, it's easy to upload and buy.  I've used  JLCPCB
many times, or hit https://pcbshopper.com/ to compare prices from multiple
vendors.

On Wed, Jan 23, 2019 at 10:48 AM Joe Frey <frey at radioles.com> wrote:

> Hello, I am going to make Harald's trigger to gate module. I built another
> one but it only offered 1sec but I want an 8sec gate!
>
>
> <https://www.haraldswerk.de/Gate_and_Trigger/Trigger_Delay/Trigger_Delay.html>
> https://www.haraldswerk.de/Gate_and_Trigger/Trigger_Delay/Trigger_Delay.html
>
> The archives seem to favor expresspcb. Do folks agree? Harald hosts the
> gerber files so I feel confident I can do this.
> JoeF.
>
> Sent from TypeApp <http://www.typeapp.com/r?b=14068>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20190123/4bf7edc4/attachment.htm>