[sdiy] Patchable polyphonic synth with FM or AM transmission idea

Scott Gravenhorst music.maker at gte.net
Thu Jan 3 12:49:18 CET 2019

As you described your new questions, I noticed you used the words "you" and "your" instead of
"I" and "my".  

Who is this "you"?  

It leaves me with the impression that this project is not something you will build, rather it
seems as if you are attempting to design a system for someone else to build.  

So after the list finishes doing all this (constructive) research for you - what happens next?

cheater00 cheater00 <cheater00 at gmail.com> wrote:
>OK so this thread currently has over 60 posts.
>--> 30 posts talk about how I'm dumb for not having considered these approaches:
>- multiple cables
>- multi conductor cables
>- digital transmission
>- crossbar switches
>- can bus, LAN, wifi
>- MADI and other digital workstation interface systems
>- probably something I forgot
>and then continue to lecture about "the XY Problem" (i.e. a veiled way
>of saying "haha, you're just so stupid, maybe learn to ask
>--> 20 posts talk about how a poly synth is a stupid idea, try to
>catch22 me with "but there are no patchable polysynths", talk about
>how the technology is absolutely not suited (and then others prove it
>is suited after all), and other stuff like that.
>--> 10 posts talk about technology remotely related to the idea posted
>in the original question.
>I've considered each of the technologies i listed above years ago. No,
>I don't want to re-visit those avenues just to validate myself towards
>people who won't let me explore my ideas "because they're dumb". I
>have looked at them long enough. I started considering this over 10
>years ago. So if anyone thinks I somehow need to jump through
>someone's hoops in order to validate my questions, uhh, yeah, no. That
>goes especially for Scott and Gordon, your responses just sucked.
>Reading this sort of negative, you-can't-do-it stuff on our list makes
>me deeply sad, especially when contrasted with responses from more
>positive members of the community who have been able to come up with
>constructive ideas and ways to accomplish things.
>Especially with comments like Roman's "You wanted multichannel FM over
>regular $0.10 patchcord - do it. You asked for solutions, instead got
>a bunch of voices saying it's a wrong way. Too bad. Do your own R&D
>and proove us wrong. Then patent it and get rich."
>Roman I seriously don't recognize you, are you sure you're in the right mood?
>--> 1 post was useful content and came from Ingo who pointed me to a
>cheap receiver chip. Thanks a lot, Ingo. I've only looked into
>transmitters so far.
>Now with that out of the way.
>You don't need racks of equipment to make a single modular voice of a
>poly synth sound good over FM transmission. It's a single synth voice,
>not a piece of classical music performed by a philharmonic orchestra.
>50 dB headroom is more than plenty. If you don't count "off", many
>synths don't have more than 45 dB dynamic range, and they're used to
>make music by people who win the grammy, so I'm not worried.
>The price isn't an impact. A transmitter chip might be about $2-4. A
>receiver about $2. There's going to be some RF stuff inbetween that
>one needs to do. That's maybe $5-6 per link, plus cable and jacks of
>some sort for $10 total. That's less than good jacks ($2.5*2) + good
>patch cables that you'll be replacing over a time span of a few years
>($10 at an attrition rate of 50% over 5 years, meaning $15). Compared
>to $20 per link using separate cables, $16 is well economical. On top
>of this, if you're talking about a polyphonic modular synthesizer, $16
>will pale in comparison to the cost of the design time electronics,
>mechanical parts, and mainframe.
>One of the reasons to explore this idea is that I've explored all
>others and this actually seems like it would be possible to build. But
>there are also many pro's:
>- compared to separate 1/4" leads, or multi-conductor cables: most of
>the complexity can be taken care of by a pick and place fabrication
>service, rather than hand-soldering front panel jacks, especially
>esoteric jacks; cables can be inexpensive;
>- compared to digital: FM transmission has no delay (not even 1ms),
>ability to perform feedback, repeated A/D-D/A conversion with
>affordable ADC and DAC chips will result in a lot of aliasing
>artifacts as well as in cross talk (due to using codec chips)
>- compared to crossbar switches: crossbar switches just cannot handle
>a flexible modular synthesizer with a lot of modules, have poor
>crosstalk and headroom, and need a lot of massaging to work in the
>first place, plus they're pretty expensive and difficult to source.
>but if anyone has notes to the opposite i'd love to hear them. bear in
>mind the design goal here is 50 inputs and 50 outputs, times 16
>- compared to CAN, LAN, WiFi: all of those are either too expensive or
>won't be able to handle runs (distances) within a single moderate size
>modular or won't be able to handle all the channels due to bandwidth
>limitations at which point you need involved topology. Delays are also
>an issue
>Handling near-DC component transmission is an interesting question.
>A few ideas on implementation that i would love to hear (constructive)
>opinions on:
>- patch cables could be normal BNC cables. this is inexpensive. 1/4"
>cables might not be good enough.
>- outputs of each transmitter should have balancing resistors of ~ 1K
>(series to output) and terminating resistors (~50 Ohms across TX pair,
>before 1K balancing resistor). This among other means the ability to
>tie together multiple outputs, and distribute them to multiple inputs,
>just by using T junctions.
>- you need one FM carrier oscillator per voice. Those should be
>central and distributed to every synth module. This means 16 good
>sinewave oscillators, they can be synthesized with DSS.
>- each module would need some sort of connector for each of the 16
>carrier oscillators, possibly BNC as well, but could also be an edge
>- given you don't need local oscillators, the FM transmitter becomes
>in essence just a few transistors and an op amp, which might be
>possible to drop. It could be easier to use a pick and place service
>rather than source a more expensive FM IC that contains a running
>oscillator just the presence of which will degrade quality. A
>transmitter IC could be $2, op amp and transistors could be quite a
>bit less, which adds up quickly.
>- using your own oscillators also means you can lower the carrier
>frequency to outside the commercial band, making it easier to create
>non-radiating patches, i.e. less cross talk between modules.
>- the receiver can be a bit more involved to create, but still
>attainable, especially with modern, stable passives.
>- you might want the modules in separate metal enclosures, just due to
>the weight of 16 PCBs.
>On Wed, Jan 2, 2019 at 2:25 PM Mattias Rickardsson <mr at analogue.org> wrote:
>> On Mon, 31 Dec 2018 at 08:01, <rsdio at audiobanshee.com> wrote:
>>> A Gate, however, is a signal that’s separate from the 
>physical switches, and it’s a digital signal. In fact, a Gate 
>signal may come from a switch (keyboard), or it may come from 
>some other source such as a sequencer, a clock, or some other 
>module. In that sense, Gate is a pure digital signal, as pure as 
>any definition of digital could be. > > > Without trying to 
>either avoid or adhere to any definitions, just my gut feeling, 
>I'd call the Gate signal a LOGIC signal. It doesn't really matter 
>if it's considered analog or digital, because DIGITAL essentially 
>implies that the signal is supposed to be *used* in a digital 
>fashion - as discretely encoded numbers of some sort. And a Gate 
>in itself doesn't have to be. It can be just a timing signal, for 
>instance when triggering a non-gated AD envelope. :-) > > /mr > 
>_______________________________________________ > Synth-diy 
>mailing list > Synth-diy at synth-diy.org > 
>Synth-diy mailing list
>Synth-diy at synth-diy.org

-- ScottG
-- Scott Gravenhorst
-- http://scott.joviansynth.com/
-- When the going gets tough, the tough use the command line.
-- Matt 21:22

More information about the Synth-diy mailing list