[sdiy] Fatar Keyboard wiring diagram vs. Pratt-Reed Keyboard

Matthias Herrmann matthias.herrmann at fonik.de
Sat Feb 23 08:10:40 CET 2019


I once grabbed this diagram from the old Fatar website. Maybe it is of some help.
The keyboards use micromatch(TM) connectors.

https://drive.google.com/file/d/1wWRfFgulkbRd6-Slyc5Ok4Pf4hkPwnuq/view?usp=sharing

cheers,
matthias


> -----Original Message-----
> From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of Terry
> Shultz
> Sent: Friday, February 22, 2019 11:55 PM
> To: synth-diy at synth-diy.org
> Subject: [sdiy] Fatar Keyboard wiring diagram vs. Pratt-Reed Keyboard
> 
> Hello folks,
> 
> I am running out of 61-note Pratt reed keyboards that I have been sitting
> on for 20 _ years.
> 
> Down to the last 5 units, I started out with 30 units and have been using
> them up.
> 
> Back in the late 1970�s I licensed the E-Mu patented poly keyboard design
> from E-Mu and I have been building
> a few Mono and Poly keyboards up. I will now have to buy some Fatar
> keyboards and they are requiring me to
> buy quite a few for packing reasons.
> 
> Does anyone have the schematic to this brand of 5 octave keyboard as I will
> have to adapt it to my existing
> design.
> 
> Otherwise, I might just go the route of Midi to CV/Gate Module as an
> alternate path.
> 
> Any suggestions on whose Midi to CV/Gate module is the best and how many
> channels out would be good to know.
> 
> best regards,
> 
> Terry Shultz
> Shultz Products LLC.
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy




More information about the Synth-diy mailing list