[sdiy] Fatar Keyboard wiring diagram vs. Pratt-Reed Keyboard

MTG grant at musictechnologiesgroup.com
Sat Feb 23 01:01:22 CET 2019


Maybe talk to Lars art https://techsmechsvintagesynth.com/ . He's had to 
deal quite a bit with Fatar keybeds and may have archived the 
schematics. Analog Haven (? ... the store) used to have the docs on 
their website.  Fatar uses Micromatch connectors.  Emergency Fatar 
keybeds can often be cannibalized from donor controllers and synths.



On 2/22/2019 2:55 PM, Terry Shultz wrote:
> Hello folks,
> 
> I am running out of 61-note Pratt reed keyboards that I have been sitting on for 20 _ years.
> 
> Down to the last 5 units, I started out with 30 units and have been using them up.
> 
> Back in the late 1970’s I licensed the E-Mu patented poly keyboard design from E-Mu and I have been building
> a few Mono and Poly keyboards up. I will now have to buy some Fatar keyboards and they are requiring me to
> buy quite a few for packing reasons.
> 
> Does anyone have the schematic to this brand of 5 octave keyboard as I will have to adapt it to my existing
> design.
> 
> Otherwise, I might just go the route of Midi to CV/Gate Module as an alternate path.
> 
> Any suggestions on whose Midi to CV/Gate module is the best and how many channels out would be good to know.
> 
> best regards,
> 
> Terry Shultz
> Shultz Products LLC.
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> 


More information about the Synth-diy mailing list