[sdiy] Fwd: Fatar Keyboard wiring diagram vs. Pratt-Reed Keyboard

Terry Shultz thx1138 at earthlink.net
Fri Feb 22 23:58:24 CET 2019


fyi,

Terry

> Begin forwarded message:
> 
> From: Terry Shultz <thx1138 at earthlink.net>
> Subject: Fatar Keyboard wiring diagram vs. Pratt-Reed Keyboard
> Date: February 22, 2019 at 2:55:29 PM PST
> To: synth-diy at synth-diy.org
> 
> Hello folks,
> 
> I am running out of 61-note Pratt reed keyboards that I have been sitting on for 20 _ years. 
> 
> Down to the last 5 units, I started out with 30 units and have been using them up.
> 
> Back in the late 1970’s I licensed the E-Mu patented poly keyboard design from E-Mu and I have been building 
> a few Mono and Poly keyboards up. I will now have to buy some Fatar keyboards and they are requiring me to 
> buy quite a few for packing reasons.
> 
> Does anyone have the schematic to this brand of 5 octave keyboard as I will have to adapt it to my existing 
> design.
> 
> Otherwise, I might just go the route of Midi to CV/Gate Module as an alternate path.
> 
> Any suggestions on whose Midi to CV/Gate module is the best and how many channels out would be good to know.
> 
> best regards,
> 
> Terry Shultz
> Shultz Products LLC.
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20190222/11bee8da/attachment.html>


More information about the Synth-diy mailing list