[sdiy] Moog Voyager - No Osc Sound

el macaco elmacaco at hotmail.com
Sat Feb 9 21:42:21 CET 2019


Doesn’t the voyager have an insert post oscillators and pre filter? The normal contact may be tarnished.  Stick a y cable in it and connect the two tips and see if you get Sox sound.

> On Feb 9, 2019, at 1:00 PM, MTG <grant at musictechnologiesgroup.com> wrote:
> 
> Not sure about that last suggestion. Old sage advice given to me when working with unknown voltage dangers: no rings and keep one hand in your pocket. No rings so you don't create shorts on your own (bracelets too I guess, etc). The one hand thing is to keep the shock from traveling across your chest (heart).
> 
>> On 2/9/2019 5:14 AM, Richie Burnett wrote:
>> Ouch. Sounds like static to me, but wouldn't do any harm to buzz out the modular case to your mains supply ground just to make sure the case is earthed properly.
>> 50/60 Hz mains shock feels different to a static shock, and doesn't jump to your finger with a "snap" just before you touch it.
>> Static will also only bite once, not a second time if you touch the case immediately again. But obviously you have to pluck up the courage to touch again straight after being bitten! Probably not the best general safety advice though... "You've been shocked? Errm... Try touching it again!"
>> Better advice: If you anticipate that you might get static shocked then approach the surface with a knuckle, (less nerve endings,) or by holding out a metal object like a key, which will take a static charge and dissipate it painlessly over a larger surface area of skin :-)
>> -Richie,
>> Sent from my Xperia SP on O2
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy



More information about the Synth-diy mailing list