[sdiy] Homemade synth clone

[Pete Hartman]

On Fri, Feb 15, 2019 at 8:07 AM Luís Marka <luis.marka at terra.com.br> wrote:

>  Also, the noise generator MM5837 seems to be made
> of Unobtanium. Will use an Electrodruid NOISE 1B chip instead!
>


It works, but you should note that the levels are (probably) different so
it is likely you'll need to make adjustments in the section that processes
the noise.

On the Roman F Source of Uncertainty, for example, had to bump a couple
resistors to increase the gain and get the noise range back to what it
should be.



>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20190215/75630930/attachment.htm>