[sdiy] stereo optical microscope for assembly and repair

Vladimir Pantelic vladoman at gmail.com
Fri Aug 23 12:25:26 CEST 2019


seems China has a solution to every problem:

https://www.aliexpress.com/item/32977875355.html

:)

On 20.08.19 14:39, Roman Sowa wrote:
> Without fumes extractor the microscope would become unusable within an
> hour. It's always on while soldering, but smetimes not all of the smoke
> goes to the proper hole.
> 
> Roman
> 
> W dniu 2019-08-19 o 20:47, sleepy_dog at gmx.de pisze:
>> Roman Sowa wrote:
>>> For years I've been using regular Bresser scientific binocular
>>> microscope bought for about $400 or so if I remember. It has 7x to 40x
>>> zoom which was indeed helpful and used full range a few times.
>>> Soldering fumes poluted optics over time and cleaning is a lot of pain.
>>
>> Would one of those help?
>> https://vkrepair.com/best-solder-fume-extractor/
>>
>> I have the DLX426, which is, granted, not very stong, you pretty much
>> need to have it where the soldering happens, maybe 10cm away. But what
>> it does is nice for the money.
>> Or if it's not about capturing the fumes, just keeping them off the
>> lense - put some larger diameter CPU fan in some wood frame/stand to one
>> side of the scope to just blow the fumes away?
>>
>> - Steve
>>
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
>>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy



More information about the Synth-diy mailing list