[sdiy] buss/rework wire

[Vladimir Pantelic]

here you go:

https://www.thingiverse.com/thing:3543435

On 05/04/2019 21:00, Kylee Kennedy wrote:
> Are the STL files available online for the spool holder? I would love to print 
> this up.
> 
> Take Care,
> Kylee
> 
> On Fri, Apr 5, 2019 at 1:27 AM Vladimir Pantelic <vladoman at gmail.com 
> <mailto:vladoman at gmail.com>> wrote:
> 
>     the keyword is "Vero wire":
> 
>     https://www.verotl.com/verowire-accessory-spools-of-wire-qty-4---2-gold-2-pink-part-number-79-19038
> 
>     https://de.rs-online.com/web/p/products/1054711/
> 
>     and the infamous Vero pencil which is actually utter crap since the tip
>     is plastic and easily ruined by the soldering iron:
> 
>     https://www.verotl.com/verowire-wiring-pen-part-number-79-1732
> 
>     what I use instead is 0.3mm automatic pencil with a little 3d printed
>     spool holder:
> 
>     https://photos.app.goo.gl/LmGXY3jZ1BQKjsNZA
> 
>     compared to "magnet" wire which has very hard to remove isolation, Vero
>     wire isolation melts away easily...
> 
> 
> 
> 
> 
>     On 04.04.19 21:00, Eric Frampton wrote:
>      > Hey all -
>      >
>      > Are any of you familiar with a buss/rework wire that has a thin
>      > insulation on it that is designed, to not be stripped, but melt when
>      > heat is applied to it at a joint? I saw this done on a unit that I
>      > got in, and it looks like a really neat way to do rework, but I don’t
>      > really know what to search for online.
>      >
>      >
>      > _______________________________________________ Synth-diy mailing
>      > list Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
>      > http://synth-diy.org/mailman/listinfo/synth-diy
>      >
> 
>     _______________________________________________
>     Synth-diy mailing list
>     Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
>     http://synth-diy.org/mailman/listinfo/synth-diy
>