[sdiy] buss/rework wire

Dave Magnuson abide at dmdrafting.com
Fri Apr 5 17:17:03 CEST 2019


I actually use telephone hook-up wire (a single strand pulled from cat 5 would probably work, too)

-----Original Message-----
From: Synth-diy <synth-diy-bounces at synth-diy.org> On Behalf Of Tim Ressel
Sent: Friday, April 5, 2019 11:02 AM
To: synth-diy at synth-diy.org
Subject: Re: [sdiy] buss/rework wire

Another technique I've used is solid buss wire and teflon tubing:

http://www.componentsupplycompany.com/product-pages/ptfe-tubing-all-walls.php?gclid=CjwKCAjw-ZvlBRBbEiwANw9UWlviozpJIDzmIlr6MtlBO-FdEXb4qY9hRshFabPss3Peruu33qHf2xoC1Q4QAvD_BwE

You attach the wire first, then cut a piece of tubing and slip it on, then cut the wire and solder down the free end. Or daisy chain to the next pin. I'll be using this very technique today in fact. If I can find my tubing...

--timmers

On 4/4/2019 12:00 PM, Eric Frampton wrote:
> Hey all -
>
> Are any of you familiar with a buss/rework wire that has a thin insulation on it that is designed, to not be stripped, but melt when heat is applied to it at a joint? I saw this done on a unit that I got in, and it looks like a really neat way to do rework, but I don’t really know what to search for online.
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy

--
--Tim Ressel
Circuit Abbey
timr at circuitabbey.com

_______________________________________________
Synth-diy mailing list
Synth-diy at synth-diy.org
http://synth-diy.org/mailman/listinfo/synth-diy





More information about the Synth-diy mailing list