[sdiy] Outputs grounded! Re: SSI2164 datasheet updated

[David G Dixon]

Hey Team!
 
I am building an oscillator, and one of the 2164s has an unused VCA.  In the
layout as it is, the pins are simply unconnected.  It would require a major
layout adjustment to bring ground to these pins.
 
However, I then realized something: The control pin is connected internally
to ground through a 500-ohm resistor.  Hence, simply connecting all three
pins of the unused VCA together would effectively ground every pin, would it
not?  This can be done with a very simple kludge.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20180902/2f128c91/attachment.htm>