[sdiy] Altering supply voltages
functionofform at gmail.com
Wed May 23 02:15:06 CEST 2018
Thanks Quincas! I’m now torn between the SL mini mk2 and Rene Schmitz’s MS20 because I just noticed that the MS20 filter has a distortion circuit in the resonance path which is super interesting to me.
Sent from my iPhone
> On May 22, 2018, at 6:41 PM, Quincas Moreira <quincas at gmail.com> wrote:
> Try the VCF in the SL Minisyjth MK2, it's superior sounding and works in 12v bipolar. Otherwise you can try the SL one with the 12v and hear how it sounds, if you don't like it you can put in a couple of regulators and bring the 12v down to 9.
> As for the Wilson I don't know how it would behave in 12v, maybe fine, maybe not...
>> On Mon, May 21, 2018 at 6:21 PM, Elaine Klopke <functionofform at gmail.com> wrote:
>> Hey all,
>> I’m thinking of making something akin to Scott Stites’ Triple Wilson SVVCF, but a bit smaller and more fitting to my style.
>> With that goal in mind, I settled on the BP/LP filter from the Soundlab Mini Synth. Which calls for +\- 9 Volts. Scott’s control and audio mixing boards call for +\- 15 Volts. What difference would it make powering both circuits with the +\- 12 Volts found in my Eurorack system?
>> Ian Smith
>> Sent from my iPhone
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
> Quincas Moreira
> Test Pilot at VBrazil Modular
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Synth-diy