[sdiy] pcb artwork to gerber

David G Dixon dixon at mail.ubc.ca
Mon May 14 18:53:39 CEST 2018


If it's a one-sided board for through-hole parts, I'll print, transfer,
etch, drill and tin for a very reasonable fee.  Email me privately if
interested.  I do this all the time for people.


  _____  

From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of john
slee
Sent: Monday, May 14, 2018 6:55 AM
To: pinoaffe
Cc: synth-diy at synth-diy.org
Subject: Re: [sdiy] pcb artwork to gerber


Possibly means having a simple image (PNG or PDF or whatever) of the copper
layer for etching purposes, like some designers share on their websites...
and wanting to turn it into Gerber+Excellon files for a board house

Not my bag (I don't want to deal with chemicals either) but lots of folks
work this way

John


On Mon, 14 May 2018 at 09:27, pinoaffe <pinoaffe at airmail.cc> wrote:


What do you mean by "artwork"?
I use kicad for designing pcb's, but I don't know what "artwork" is supposed
to be, and in what file format, etc.
Oops, forgot to press "reply list" first time round


On 05/14/2018 11:11 AM, geoff james wrote:


Hi i'm a newbie to pcb DIY.

The only thing i know is i dont want anything to do with chemicals or
transfers etc.

I have the pcb artwork  , and the board sizes.

The artwork will need some mods to allow for new component profiles---pots ,
and will need scaling. 

Can anyone suggest a program thats newbie friendly-----this is a hobbie and
more than likely

 a one off.

Thanks



 

_______________________________________________

Synth-diy mailing list

Synth-diy at synth-diy.org

http://synth-diy.org/mailman/listinfo/synth-diy


_______________________________________________
Synth-diy mailing list
Synth-diy at synth-diy.org
http://synth-diy.org/mailman/listinfo/synth-diy


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20180514/39a68ef0/attachment.html>


More information about the Synth-diy mailing list