[sdiy] Parts going out of module panel

Mattias Rickardsson mr at analogue.org
Tue May 1 02:01:35 CEST 2018


Have these sets of suitable and almost-standard eurorack panel components
been documented anywhere, or does a small reverse-engineering activity have
to take place every time? :-)

/mr

Den mån 30 apr. 2018 15:04Tom Wiltshire <tom at electricdruid.net> skrev:

> > My impression is that any height can work, so long as all of your
> components have a compatible height with each other.
>
> That’s *exactly* the problem, Brian. Finding a set of components that
> provide all the options you need (jacks, pots, switches, etc - at least
> LEDs are easy!) is not at all simple. In theory, it’s possible. In
> practice, it’s time-consuming and difficult if it’s possible at all. Hence
> the move in Euroland towards an almost standardised set of parts as one
> manufacturer learns from another and saves themselves some time by using
> similar parts. The two-PCBs-parallel-to-panel Skiff-friendly design of
> Eurorack modules has definitely been the direction of travel in recent
> years and alongside that people have learned which parts they can use in
> those designs.
>
> Tom
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20180501/a4868c85/attachment.html>


More information about the Synth-diy mailing list