[sdiy] Aluminum Engraving with Laser system

[Dave Leith]

I used   http://www.cam-expert.com/

- Cam Expert LLC. 745 W. Ventura Blvd.
- Unit H-I
- Camarillo, CA

On Tue, May 29, 2018 at 11:50 AM, Roman <modular at go2.pl> wrote:

> Yes, I'm doing it all the time, although not this particalar machine, but
> also 2.5W LED laser.
> Works great on black anodized aluminium. It doesn't scratch the anodizing
> layer, so results are just as durable as non-marked anodized aluminium,
> only burns out the tint so it gets almost white markings. Let's call it
> light gray.
> Works also on other dark colors, but the best results are on black
> obviously.
> I did it also few times for other people as small runs service, and they
> were delighted with results more than I was.
> I'll post some picture of one example job on facebook in a few days when I
> sort out the job itself.
>
> Roman
>
> Dnia 29 maja 2018 18:27 Terry Shultz <thx1138 at earthlink.net> napisał(a):
>
> https://mailchi.mp/elektor/elekslaser-en-824222?e=60cca40a57
>
> I see a Laser engraving system on Elektor.
>
> Has anyone used such a tool on aluminum Front Panels?
>
> I have no experience with Laser etching and thought this might be useful
> as alternative to silk Screeing.
>
> regards,
>
> Terry
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20180529/0c59fed3/attachment.htm>