[sdiy] Simple Cable recommendation

[S Ridley]

If the small size requirement is to get into the mini XLR connectors, it's
possible to ream the strain relief sleeve out to at least 5mm with a twist
drill without significant loss of strength.  I've got 4.8mm star quad mic
cable into mini XLRs without too much difficulty.

If you need small size for other reasons, a search on lavalier mic cable
might prove helpful.  Mogami do a good range, but the cheapest is around
50c/foot.

Steve




On 25 May 2018 at 07:57, Busby Bergson <busby.bergson at gmail.com> wrote:

> Hi all-
>
> I've been searching for some mic cable, but I'm having a hard time
> meeting the criteria I'm looking for. Essentially, I would like it to
> be extremely flexible, thin, and cheap. A lot of the stuff I've been
> seeing is PVC-insulated and I suspect I need something with silicone.
> The only things I've found seem to be astronomically expensive. Any
> suggestions?
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20180526/17d4d0a3/attachment.htm>