[sdiy] Expo VCOs: some thoughts

[Andrew Simper]

On Tue, 22 May 2018 at 15:44, Tom Wiltshire <tom at electricdruid.net> wrote:

> 100 x 109mm for four 3340 VCOs is doable, I’d have said, even using DIP
> and through hole. Doing it in surface mount would be too easy!
>
> I agree with Andrew that you should explain that the patent has expired,
> so no-one is doing anything dodgy. But if the customer wants CEMs, the
> customer can have CEMs. Tell them what the price differential will be and
> then see whether they decide it isn’t so important after all.
>
> ==================
>        Electric Druid
> Synth & Stompbox DIY
> ==================
>

For the record the great comment about the patent was from Michael Caloroso
:)

Cheers,

Andy
-------------- next part --------------
   On Tue, 22 May 2018 at 15:44, Tom Wiltshire <[1]tom at electricdruid.net>
   wrote:

     100 x 109mm for four 3340 VCOs is doable, Iâd have said, even using
     DIP and through hole. Doing it in surface mount would be too easy!
     I agree with Andrew that you should explain that the patent has
     expired, so no-one is doing anything dodgy. But if the customer
     wants CEMs, the customer can have CEMs. Tell them what the price
     differential will be and then see whether they decide it isnât so
     important after all.
     ==================
     Â  Â  Â  Â Electric Druid
     Synth & Stompbox DIY
     ==================

   For the record the great comment about the patent was from Michael
   Caloroso :)
   Cheers,
   Andy
   Â

References

   1. mailto:tom at electricdruid.net