[sdiy] DIY Sequenced Power?

John P Shea info at extrinia.com
Mon Mar 5 02:32:34 CET 2018


Here's one from a local hardware store:

https://www.bunnings.com.au/arlec-remote-controlled-power-outlet_p4331763

They are no doubt plentiful online.

Meets the low cost part of the requirement (if you don't mind manually
pressing buttons in order), but this type only has 4 channels.

Regards,
JPS

On 5 March 2018 at 10:52, John P Shea <info at extrinia.com> wrote:

> Maybe a few of those remote control (RF) outlets? You can use a few
> outlets off the same remote, just set the right channel for each.
>
> Check output rating vs load.
>
> Regards,
> JPS
>
> On Mon, 5 Mar 2018 at 9:41 am, Joel B <onephatcat at earthlink.net> wrote:
>
>> Hi SDIY, I have a pile of power conditioners in my studio and have to
>> walk around crawl under various things to power it all on and to power it
>> all off. The idea of putting them all on one sequential power box on one
>> outlet seems pretty dangerous, not to mention $250-650 for a power
>> sequencer that the 6 conditioners could hang off...
>>
>> Any ideas for sequentially turning on 6 separate power supplies in a
>> room, each on a separate outlet? What parts would you choose to build such
>> a thing?
>>
>> Joel
>>
>> Sent from my iPhone
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20180305/ec27787a/attachment.html>


More information about the Synth-diy mailing list