[sdiy] Moog 904B HPF PCB art

[Roman Sowa]

That's funny, I have found my own pictures of depanelized modules stack 
copied there in this moogmusic forum thread! Recognized my desk, bubble 
foil and Korg keytar handle. Too bad I didn't make clear shots of every 
module. At some point it seemed like useless waste of time, so I stopped 
after a few.
At first I didn't recognize the 904B artwork, but after comparing with 
the drawing in this forum it turns out I have it.
Take a look if that's still needed, last one is components side view:
http://www.synthdiy.eu/files/IMGP5994.JPG
http://www.synthdiy.eu/files/IMGP5995.JPG
http://www.synthdiy.eu/files/IMGP5996.JPG

Roman

W dniu 2018-03-27 o 18:51, Julien pisze:
> Hi David,
> 
> There is this one on the Moog forum : 
> https://forum.moogmusic.com/viewtopic.php?f=1&t=22022
> (Near the end)
> 
> Julien
> 
> Le 27 mars 2018 à 14:41, Jean-Pierre Desrochers <jpdesroc at oricom.ca 
> <mailto:jpdesroc at oricom.ca>> a écrit :
> 
>> Do you really need an original Moog pcb artwork ?
>>
>> A couple of months ago I built a complete Moog VCF's trio clone
>> made of 3 modules: 904A, 904B & 904C ..
>> All of these modules can be built separately.
>> My open source files for the 904B module clone
>> can be found here:
>> http://www.arcenson.com/projects/Modular/M104B_Highpass_Filter_Moog_904B_clone/Module_pictures/
>>
>> JP
>>
>> Le 2018-03-27 01:31, David G Dixon a écrit :
>>
>>> Hi Team,
>>>
>>> Someone has asked me to make a couple of PCBs for cloning the Moog 904B
>>> high-pass filter, and I've stupidly said yes.  I'm trying to etch and drill
>>> a PCB which is more or less identical to the original, with the funky edge
>>> connectors and everything.  I have two images of the original PCB art, but
>>> one is pretty ragged, and the other has a bunch of circuit diagram stuff
>>> written on it.
>>>
>>> Does anyone here have a clean image of the PCB art for this thing that you
>>> could send to me?  I can't seem to find anything on the internet.
>>>
>>> Thanks in advance!
>>> Dave Dixon
>>>
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
>>> http://synth-diy.org/mailman/listinfo/synth-diy
>>
>> -- 
>> « L'indépendance, c'est comme un pont :
>> avant, personne n'en veut, après, tout le monde le prend. »
>> Félix Leclerc
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
>> http://synth-diy.org/mailman/listinfo/synth-diy
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>