[sdiy] (Ab)use DAC as mixer?

[Roman]

2 reasons why you shouldn't do it:  - zipper noise  - altering DC bias with volume control (thumping)  But since you want to tuse just for static mix of waveforms, both those reasons are not valid anymore. Go for it. It's been done like this for decades.   Best if your input waveforms are not bipolar, so you don't have to bias it. And if you need to remove thumping, just add another set of DACs loaded with the same value, and subtract both.  Yes you can use the one filter for the mix of 4, but you don't actually need any filter. You treat it as digital potentiometer. No reconstrucion is needed as no sampling is happening. You only change the attenuation ratio for each input from time to time, hence zipper noise, but if I understand your description properly, it's only done once when changing patches or something.   Roman   Dnia 2 czerwca 2018 09:46 Roman <  sleepy_dog at gmx.de > napisał(a):  Hey list,   this has been floating around in my mind for some years and I just  remembered it again, so maybe some of you know something about this:   Would it be feasible to "abuse" a quad DAC with 4 independant Vref  inputs as a 4 channel, digitally controlled  mixer?   I.e., you feed in 4 analogue voltages into the 4 Vref inputs, and  control the volumes by writing digital output values.  The DAC I had in mind (TLV5620, price OK) only has 8-bit resolution and  can stomach only 1/2 Vcc (1.65V I believe),  and it's positive-voltage-only, but that would do away with so much  effort, in comparison to other solutions I'm aware of...  So If I have up to 4 audio sources which are already positive-only,  *some* of which might come out of a DAC and not yet put through a  reconstruction filter,  I could mix them all that way, and put only one reconstruction filter  for the mix?   Yeah, it's for something like waveform mixing. Not planning on a high  update rate for the digital volume levels (so far), just manual knob  adjustment. Although I could imagine it might be cool to modulate that  somewhat, if that doesn't get too noisy.   But the layman I am, I probably don't know about some horrible side  effects that may have :-D   What can you say about the feasibility of those two aspects (and then  others I may have overlooked):  1) using a DAC this way in general  2) my desire to skimp on the number of reconstruction filters, filtering  the mix (I'm not sure I'd be using > 1 DAC output for audio, but keep it  in mind as an option, when DAC resolution is moderate)   - Steve   ______________________________  Synth-diy mailing list   Synth-diy at synth-diy.org  synth-diy.org synth-diy.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20180602/c61d0f06/attachment.htm>