[sdiy] 0805 resistors with consistent 3 or 4 digit value markings?

Pete Hartman pete.hartman at gmail.com
Sat Jan 6 20:23:39 CET 2018


I have a few handfuls that way, actually.  Don't recall the manufacturers
either, all stuff gotten in various sources (some from mouser, some in a
"book" of various values from Adafruit).

On Sat, Jan 6, 2018 at 12:09 PM, Roman <modular at go2.pl> wrote:

> Resistors are without marking in the store photos because they use the
> same photo for every value and don't want to confuse people. I have never
> encountered 0805 resistor without marking in 20 years.
>
> Roman
>
>
> Dnia 6 stycznia 2018 08:04 Robin Whittle <rw at firstpr.com.au> napisał(a):
>
> Does anyone know of a range of 0805 resistors in which all values are
> consistently marked numerically with their value?  For instance, for
> 560R and 120k:
>
> 561  124
>
> would be best.  Alternatively:
>
> 5601  1203
>
> I only need the E12 series: 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68,
> 75 and 82.  1% or 5% is fine.
>
> There's a range of 0805 resistors at element14 manufactured by Yageo
> (Phycomp).  For instance the 1% "RC0805FR-07560RL" (9237461).  As best I
> understand the datasheet:
>
>  http://www.farnell.com/datasheets/2167052.pdf
>
> these all should be marked with four digits, but the 39k
> (RC0805FR-0739KL = 9237828) is simply black.  Likewise the 220k
> (RC0805FR-07220KL = 9237917). The 390k (RC0805FR-07390KL = 9237941) is
> marked "E06E".
>
> I had a quick look at Mouser, but there were a plethora of resistor
> types, some quite expensive and many of which were illustrated as not
> being marked.  The illustrations and apparently the data sheets can't be
> trusted anyway.
>
> Its bad enough having anonymous ceramic capacitors and diodes (Diodes
> Inc at least) with the polarity line only visible with a magnifier.
> Vishay 1N4148Ws have a clearly visible laser-marked cathode line.
> Ideally all the resistors I use would have relatively large 3 digit
> value text.
>
> I bought a Chinese-made book of 0805 resistors and a few capacitors from
> eBay a few years ago.  The resistors are all 5% Yageo and are marked
> clearly with three digits.  However, the range is more per decade than
> E12, and misses out on several of the E12 values.  Looking again at
> eBay, I couldn't find any resistor books where the range of values was
> specified properly and where resistor marking was also specified.
>
> A book would be good, but an actual range of resistors I can order on
> tape in any quantity would be best.
>
> - Robin    Daylesford Victoria Australia
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20180106/e9b4334c/attachment.htm>


More information about the Synth-diy mailing list