[sdiy] Where to buy ceramic caps

[paula at synth.net]

I rarely use simulations, I've yet to find a good one. The problem with
the simulators is that they're "too good" and don't get all the
information and can lead you down rabbit holes. 

I prefer to build in small blocks, schematic->PCB, then test each block,
then put them all together. 

Paula

On 2018-01-02 19:19, Roman wrote:

> Just when I thought this little topic that got out of hands was over, I spotted one line that brought my attention, quoted below. I can relate to that a bit. For most of the times I lay out a board without simulation and without schematics. So, there you go... 
> 
> Roman 
> 
> Dnia 30 grudnia 2017 07:40 Michael E Caloroso <mec.forumreader at gmail.com> napisał(a): 
> 
> You laid out a circuit board with total faith in a simulation without 
> actually proving the design?  BRILLIANT!

_______________________________________________
Synth-diy mailing list
Synth-diy at synth-diy.org
http://synth-diy.org/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20180102/0a6d1004/attachment.htm>