[sdiy] Filter Help

[Roman Sowa]

Hi,
"very sensitive to CV" brings one idea - do you have proper CV scaling 
in there? Control input has about 0.2V/oct response, so that is 
something like very sensitive. Measure voltage directly at control pins 
while changing input CV to see if it changes accordingly, let's say 
between 0V and +1V and you can hear 5-octave sweep.

Also check all the ussual stuff, GND connection, RC networks at inputs, 
if outputs are kept at 0V, and if it integrators are not clipping at 
power rails.

Roman

W dniu 2018-02-23 o 01:41, Tim Ressel pisze:
> Hi
> 
> I am trying to get a 2164 SVF design to behave. I can't seem to get the 
> frequency scaling right. It is very sensitive to CV. I thought you can 
> make a volt/oct filter out of it. btw I am going off the Shruti 
> schematic. Anyone got some stick time on this puppy?
>