[sdiy] clock pulse to vtrig

[Adam Inglis]

That’s a useful little circuit.
And I like Brian’s quick and dirty approach to modify it to specific needs.
I assume Joe is talking about adding an adjustable gate voltage - I think that would be a very useful addition here. Why wouldn’t adding a pot in there work?

Adam
> On 28 Dec 2018, at 1:21 AM, Joe Frey <frey at radioles.com> wrote:
> 
> Thanks for the help. I am wondering if I wanted to limit the output of the yusynth pulse delay to 5V would I make a voltage divider by adding a 5k resistor after R7 and change R8 to 5k from 10k?
> If I wanted to vary the gate size could I do the above and change R8 to a 5k pot?
> Please refer to
> http://www.yusynth.net/Modular/Commun/PULSEDELAY/pulsedelay-sch.gif <http://www.yusynth.net/Modular/Commun/PULSEDELAY/pulsedelay-sch.gif>
> 
> at
> 
> http://www.yusynth.net/Modular/EN/PULSEDELAY/index.html <http://www.yusynth.net/Modular/EN/PULSEDELAY/index.html>
> 
> Thanks. JoeF.
> 
> Sent from TypeApp <http://www.typeapp.com/r?b=14068>
> On Dec 17, 2018, at 2:03 PM, Joe Frey <frey at radioles.com <mailto:frey at radioles.com>> wrote:
> Hello all, this is a follow-up to an email from 2 weeks ago some may remember. Anyway, I am using a clock out from my EHX 8-step sequencer to trigger my Lyra-8. The Lyra-8 plays for as long as the clock pulse. I want to be able to create a longer and variable pulse using a circuit. I am not interested in tackling programming a microcontroller, yet.
> Can anyone point me in the direction of some circuitry that can do this? Thanks. JoeF.
> 
> Sent from TypeApp <http://www.typeapp.com/r?b=14068>
> 
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy <http://synth-diy.org/mailman/listinfo/synth-diy>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20181229/0a4c5f5d/attachment.htm>