[sdiy] Patchable polyphonic synth with FM or AM transmission idea

Joel B onephatcat at earthlink.net
Fri Dec 28 05:14:42 CET 2018


Cat5 cable might be a nice small footprint way to send multiple signals from module to module with easy connect/disconnect-ability. 8 wires per cable, nice little phone-jack...

Joel

Sent from my iPhone 

> On Dec 27, 2018, at 5:55 AM, Roman Sowa <modular at go2.pl> wrote:
> 
> Frequency domain multiplexing was used long time ago in telephony.
> How nice and easy solution this was can be simply put in two questions:
> - why nobody remembers that?
> - why it was abandonned so quickly?
> 
> I mean you have ready to use multichannel digital standards and multichannel ADc and DACs, why bother using an ancient idea that was so troublesome to manage that even 0.3-3.4kHz bandwith audio was a challenge.
> And if you want full analog, I'd go with multipin connectors, there are lots to choose from. OK expensive patch cable then, but still a tiny fraction of the price of any 16-voice module.
> 
> Polysynths are hardwired for a reason.
> 
> Roman
> 
> W dniu 2018-12-25 o 20:49, cheater00 cheater00 pisze:
>> Hi everyone,
>> I was thinking again about how you could do a modular polysynth well,
>> and it occurred to me that you might be able to use frequency domain
>> multiplexing (FDM) to put several signals over a single conductor
>> pair. A quick search found the Si4710 which is a bit pricey at ~$12 on
>> digikey but it's a tiny 3x3mm QFN device that performs complete FM
>> transmission. In a 16 voice system, at about 5 output functions per
>> module, and 12 modules, you can easily use up ~1000 of those, which
>> drops the price to $4. I was wondering what everyone thinks about this
>> sort of scheme.
>> Given that metal patch cables could function as antennas and cause
>> both cross talk and external signal pick up, one could also use
>> multimode glass fiber and transmit signals this way. The question is,
>> does anyone know whether support electronics could be found that are
>> integrated enough (small in footprint) and inexpensive? The idea would
>> be to build an electronics module that takes 16 analog audio channels
>> and outputs a signal that can be then converted to glass media
>> signalling.
>> Merry Christmas everyone!
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy





More information about the Synth-diy mailing list