[sdiy] Tri-core oscillator sync

[ulfur hansson]

regarding reversing sync, i imagine the output amplitude will drop if the sync input exceeds the oscillator base frequency (just like the common DCO design problem)

am i misguided or is this a problem that has to be addressed while designing a soft-syncable oscillator?

Sent from outer space

> On Dec 18, 2018, at 12:12 PM, Mattias Rickardsson <mr at analogue.org> wrote:
> 
> I'd rather define it like:
> 
> "Hard sync" syncs the slave every time,
> 
> "soft sync" syncs the slave sometimes, i.e., when it has completed enough of its cycle.
> 
> Then the actual sync type in both these above sync methods can be either "reset sync" or "reversing sync".
> 
> /mr
> 
> 
>> On Tue, 18 Dec 2018 at 06:45, Michael E Caloroso <mec.forumreader at gmail.com> wrote:
>> "Hard sync" means that the charging core is prematurely reset by an
>> external trigger.  It is intended to create a complex waveshape with
>> altered harmonics.  By altering the frequency of the sync'd VCO above
>> that of the master VCO, you sweep the harmonics.
>> 
>> "Soft Sync" means the slave VCO is oscillating at the same frequency
>> of the master VCO.
>> 
>> MC
>> 
>> On 12/17/18, Tim Ressel <timr at circuitabbey.com> wrote:
>> > Hi,
>> >
>> > I have made a triangle core oscillator that works really well except for
>> > the sync. I implemented what I thought would be hard and soft sync but
>> > the results were disappointing. As I understand it my "hard sync" is
>> > known as "reversing sync" i.e. a rising edge causes the steering flip
>> > flop to change state and thus the wave reverses. My "soft sync" changes
>> > the upper set point on the window comparator.
>> >
>> > I would like the soft sync to sound like the Doepfer A-110-2 oscillator
>> > soft sync if possible.  Thoughts?
>> >
>> > --
>> > --Tim Ressel
>> > Circuit Abbey
>> > timr at circuitabbey.com
>> >
>> > _______________________________________________
>> > Synth-diy mailing list
>> > Synth-diy at synth-diy.org
>> > http://synth-diy.org/mailman/listinfo/synth-diy
>> >
>> 
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20181218/c33165b4/attachment.htm>