[sdiy] Rene Schmitz VCADSR

Kristian Blåsol kristian.borgstedt at gmail.com
Sun Dec 16 15:42:12 CET 2018

Thanks for a really fast respons. :) Ok that explains a lot (and makes so
much more sense). So would I read that symbol as the connection to the
middle is the control pin and the other two connections are the two pins
that should be connected? It seems obvious but I might as well ask. :)

sön 16 dec. 2018 kl. 15:33 skrev bbob <fluxmonk at gmail.com>:

> Doesn't look like it's labeled on the schematic, but those are all CMOS
> electronic switches, probably a pair of 4066s.  Generally, they trigger in
> sequence as the A, D, S, and R phases of the envelope become active.
> On Sun, Dec 16, 2018 at 9:26 AM Kristian Blåsol <
> kristian.borgstedt at gmail.com> wrote:
>> Hello,
>> I would like to build Rene Schmitz VCADSR, and have been studying the
>> schematics. It seems to be a very versatile VCADSR that can be tweaked to
>> do tons of stuff...
>> I just wonder if anyone could explain all the switches in the schematics?
>> In his notes I havent found anything about these. Only all the stuff one
>> can do with it ;) I havent either seen a front panel of someone who have
>> built it to see if they have 8 switches on them?
>> I know Rene is on this mailing list and maybe wants to answer himself :)
>> Or  if anyone else has done this and could share their notes?
>> Oh, a link to the schematics maybe :)
>> https://www.schmitzbits.de/vcadsr.html
>> Thanks in advance, and Thanks Rene for the very nice VCADSR (at least on
>> paper so far ;)
>> /Kristian
>> --
>> ---
>> Kristian Blåsol
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
> --
Kristian Blåsol
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20181216/3a847a0b/attachment.htm>

More information about the Synth-diy mailing list