[sdiy] circuit to create gate to accompany cv

[Joe Frey]

Tx to all! Looked at the muff wiggler thread and made the mods. It works well enough. The clock pulse is high long enough. In time I will make a proper box but for now I have enough to use this sequencer and the Lyra-8 for a show on the 15th.
Couldn't do it without your rest help. JoeF.

⁣Sent from TypeApp ​

On Dec 3, 2018, 1:32 PM, at 1:32 PM, Tom Wiltshire <tom at electricdruid.net> wrote:
>I’m sure I’ve seen a synth that does that recently, reading through
>some old schematics. It set a window comparator with the current CV so
>that a pulse could be triggered when the CV changes. Can’t remember
>what it was exactly though…gagh! If it comes back to me, I’ll post it.
>
>Alternatively, hack something onto that Rate LED above the tap tempo
>switch to give you a Gate Out. That’s probably simplest.
>
>HTH,
>Tom
>
>==================
>       Electric Druid
>Synth & Stompbox DIY
>==================
>
>> On 3 Dec 2018, at 17:33, Joe Frey <frey at radioles.com> wrote:
>> 
>> Hello list, I have a EHX 8-step sequencer that is great for live
>stuff(sliders and tap tempo) but it doesn't have a gate out just cv. I
>want to use it  with my Lyra-8 which needs a gate pulse, too. I am
>trying to find a circuit that would make a gate pulse to accompany the
>cv of the EHX . Ideally small enough to fit in a box that could be
>considered "inline" and battery powered. 
>> 
>> Sent from TypeApp
>> 
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20181204/0bbb0d5a/attachment.htm>