[sdiy] Odp: Pink?

Quincas Moreira quincas at gmail.com
Wed Aug 22 02:24:01 CEST 2018

I just built the Non Linear Circuits Resonate module, it's a 4 channel
version of the Korg K1000 resonator, sounds great, pretty simple build :)

On Tue, Aug 21, 2018 at 12:11 PM David G Dixon <dixon at mail.ubc.ca> wrote:

> > But if you want to do something more complicated, why not use
> > two filters?
> > One with a fairly high cutoff and gentle slope to roll off
> > the highs, and another to do other tasks like applying a
> > timbre envelope.  The high-roll-off filter wouldn't be set up
> > to track oscillator pitch, though if you found this helpful
> > you could patch it to be just lightly modulated by the pitch CV.
> I was thinking, how about using a resonator with a fixed cutoff (or
> something like the Polymoog resonator, with three fixed cutoffs) to shape
> the basic sound pre (or post) VCF?  Given how good everything seems to
> sound
> through the Polymoog resonator, and how simple a device it is, I'm
> surprised
> that more people don't have them.
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy

Quincas Moreira
Synth Diy Guy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20180821/207ba064/attachment.htm>

More information about the Synth-diy mailing list