[sdiy] Delay ranges

[Tristan]

The powers of 2 work well for the range selection as it is very easy to implement by just masking off 
bits on the address bus. Although there is merit in having x2,3,4,6,8,12,16 etc or a straight multiple 
x1,2,3,4,5,6,7 etc.

/Tristan

On Sun, Apr 22nd, 2018 at 3:28 AM, Mike Beauchamp <list at mikebeauchamp.com> wrote:

> > I have a delay with a max of 2.7 seconds and I'd like to split it up 
> > into 3 ranges. I'm thinking 0-50mS, 0-700mS, and 0-2.7 Sec. What do you 
> > think?
> 
> 
> Hi Tim, what about the "range" knob being a multiplier on the delay time 
> (eg: x2, x3, x4, x8, etc.). This way if the delay time has been set to 
> match a tune's tempo, the multiplier switch will keep it in time but 
> offer different feels.
> 
> Mike
> 
> 
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> 
>