[sdiy] Euro Synth Spec

[Bruno Afonso]

Is this a matter of tolerances? For example this is a known problem with
lower quality xlr plugs and people still use neutrik when they want to be
sure they won't run into this problem.

On Thu, Oct 26, 2017, 00:53 p. hendricks <ph at comcast.net> wrote:

> It's hard enough getting 3.5mm plugs and jacks to match!
> Maybe start with that?
> About every plug and jack seems different, so, some cables work with
> some modules but not with others and not so well with others.
> There is a huge difference between 3.5mm jacks and plugs from various
> manufacturers.
> They are not all the same, as Malekko found out when TipTop plugs were
> longer than most and blew up the original Envelators.
> Even different Doepfer brand cables are very different.
> This seems like it would be the most important to users.
>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20171026/6f17b026/attachment.htm>