[sdiy] Euro Synth Spec

[john slee]

On 23 October 2017 at 02:48, Pete Hartman <pete.hartman at gmail.com> wrote:
> It is not much harder to verify the boxed header most of the time.

Andrew of NonLinearCircuits fame has come up with a nice way of making this
visually obvious on the module side: the pin headers have red instead of
black
plastic around the -12V pins. So it visually — and very obviously — matches
the red stripe on the cable.

Doesn't protect against bad user or bad cables, of course.

It's a shame the Eurorack thing has accumulated so much inertia. Very hard
to
change now...

John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20171023/7e0f5d4b/attachment.htm>