[sdiy] Euro Synth Spec

[Quincas Moreira]

That's good to know Mark. I assume signal levels were set at 0-10v for
positive only and +/- 5v for bipolar, yes?
And power is Red Stripe Down, boxed and keyed headers, anything else we
should know? I'd like to get in that Google group, how do I apply?
Cheers
Quincas

On Sun, Oct 22, 2017 at 1:18 PM, mark verbos <markverbos at gmail.com> wrote:

> Thing is, there is one. It’s called Red Stripe Down. It started as a
> meeting at Superbooth 2016 and is now a Google group. Signal levels and
> power connector stuff was all agreed upon. The problem is, each new
> designer that enters the forum proposes that everything be changed to his
> way.
>
> Mark
>
>
>
>
>
>
> > On Oct 20, 2017, at 10:58 PM, Quincas Moreira <quincas at gmail.com> wrote:
> >
> > I think Eurorack could benefit from a standards committee, like how midi
> was implemented back in the day.  I've thought about this a lot. I think
> Rails should be magnetic and power connectors like magsafe right on the
> rails. 15v DC and each module would subregulate for 12v Bipo. 1.5mm
> stainless panels (due to the magnetic rails)
> > But hey, what do I know...
>
>


-- 
Quincas Moreira
Test Pilot at VBrazil Modular
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20171022/5230528b/attachment.htm>