[sdiy] Euro Synth Spec

[Lindsay]

If the voltage drop is an issue, (p ch) MOSFETs can be used with 
little extra circuitry (+ cost).

Sent from my iPad

> On 21 Oct 2017, at 20:46, Ben Bradley <ben.pi.bradley at gmail.com> wrote:
> 
> Do many or any Euro modules have reverse-polarity protection? It seems
> easy enough to add a series Schottky rectifier in series with each
> power line, but it adds parts cost and drops a little voltage where
> people are already thinking the 12V supplies should be 15V.
> 
>> On Sat, Oct 21, 2017 at 4:57 AM, Vladimir Pantelic <vladoman at gmail.com> wrote:
>> because they don't care about their customers
>> 
>> 
>> On Oct 21, 2017 10:10, "Quincas Moreira" <quincas at gmail.com> wrote:
>> 
>> Why would they do that!
>> 
>> Sent from my iPad
>> 
>> On Oct 21, 2017, at 2:15 AM, Paul Burns <paul at pbdj.co.uk> wrote:
>> 
>> I recently purchased a Eurorack Jomox Mod.brane module.
>> 
>> It uses boxed headers for power (great, I like boxed headers), only the
>> design had utilises the header the wrong way round. Included was a
>> proprietary cable.
>> 
>> On the net there is a pdf of how to file off the key if you use a cable
>> other than the one provided.
>> 
>> http://www.jomox.com/upload/tools/AttentionPittsburgTipTopInstallation_E.pdf
>> 
>> My solution was just to gently prise off the plastic boxed header from the
>> pins and turn it round. Sorted.
>> 
>> regards
>> 
>> 
>> Paul
>> 
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
>> 
>> 
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
>> 
>> 
>> 
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy