[sdiy] 8080-based synth reliability

[Rick Jansen]

Nerd! :-)

> On 6 Oct 2017, at 22:07, Ove Ridé <nitro2k01 at gmail.com> wrote:
> 
> You ought to document the project for posterity and 5 minutes of Hackaday fame. If you post a ROM dump or perhaps source code if it survived for all these years, the project might take on a modern life on its own by dedicated hackers. (I for one wouldn't mind looking at it.)
> 
>> On Friday, 6 October 2017, Dave Brown <davebr at modularsynthesis.com> wrote:
>> This is definitely DIY related and somewhat synth related in that it is a digital 3 voice synthesizer.  In late 1976 I designed a dedicated 8080 based three voice PWM synthesizer as a doorbell.  The code was based on a program called Music for the Processor Technology Sol-20 computer.  I had to disassemble the program to get it to run on a basic 8080 system using a single 2708 EPROM and two 2114 static rams.  It used a simple transistor driver for the speaker.  The 8080 is unmarked so I think it might even be an engineering sample.
>> 
>>  
>> 
>> This system has continuously run for approximately 14,870 days or nearly 356,880 hours.  Well this week it died.  The processor is just absolutely lifeless.  I had another 8080 from the same vintage but at least marked and replacing it brought the system back to life.  Note that in the 40 years the 2708 has not forgotten even though the guaranteed retention is only 10 years.  I think it will outlive me.
>> 
>>  
>> 
>> It was a really progressive program for the time.  This doorbell also includes a RS-232 interface so I could compile new music to upload to it for special occasions.
>> 
>> 
>> Dave
>> 
>>  
>> 
>> David J. Brown
>> 
>> Modular Synthesis, LLC
>> 
>> http://modularsynthesis.com
>> 
>>  
>> 
>>  
>> 
> 
> 
> -- 
> /Ove
> 
> Blog: <http://blog.gg8.se/>
> 
> "Here is Evergreen City. Evergreen is the color of green forever."
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20171006/5fdda3f8/attachment.htm>