[sdiy] Easy expo VCO suggestions for seqencer's LFO clock..

[Jean-Pierre Desrochers]

Thanks Jacob, 

But why did you choose the X-4046 VCO from anything ?
Just curious.. 

JP 

************************************************ 

Le 2017-10-06 10:05, Jacob Watters a écrit : 

> A 4046 with an expo convertor might do. Remove all the waveshaping parts from the X-4046 VCO if you need a schematic to follow. 
> 
> On Oct 6, 2017 9:33 AM, "Jean-Pierre Desrochers" <jpdesroc at oricom.ca> wrote:
> 
>> Hi list, 
>> 
>> Anybody have a suggestion for an easy to build expo VCO (1v/oct)
>> that would be used as an LFO for my next sequencer project ?
>> I only need pulses output to drive digital sequence chips
>> and some stability because it's gonna be the sequencer's internal clock.
>> I've been checking around on the web. 
>> 
>> Thomas Henry VCO designs could do but I'm not sure.
>> Again, I only need square (pulses) outputs. 
>> 
>> Thanks. 
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy [1]

-- 
« L'indépendance, c'est comme un pont : 
avant, personne n'en veut, après, tout le monde le prend. »
Félix Leclerc

 

Links:
------
[1] http://synth-diy.org/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20171006/a41e10c9/attachment.htm>