[sdiy] Easy expo VCO suggestions for seqencer's LFO clock..

[Jacob Watters]

A 4046 with an expo convertor might do. Remove all the waveshaping parts
from the X-4046 VCO if you need a schematic to follow.

On Oct 6, 2017 9:33 AM, "Jean-Pierre Desrochers" <jpdesroc at oricom.ca> wrote:

> Hi list,
>
> Anybody have a suggestion for an easy to build expo VCO (1v/oct)
> that would be used as an LFO for my next sequencer project ?
> I only need pulses output to drive digital sequence chips
> and some stability because it's gonna be the sequencer's internal clock.
> I've been checking around on the web.
>
> Thomas Henry VCO designs could do but I'm not sure.
> Again, I only need square (pulses) outputs.
>
> Thanks.
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20171006/072abfe9/attachment.htm>