[sdiy] Those AS33xx chips again...

[Chromatest J. Pantsmaker]

Funny, out of this thread, Andre's email has been the hardest for me to
read due to formatting.  :-)

(And gmail put his original email in a new thread/grouping separate from
the "un subscibe" one)
On Nov 30, 2017 11:04 AM, "Andre Majorel" <aym-htnys at teaser.fr> wrote:

> On 2017-11-29 20:23 +0100, Roman wrote:
>
> > I know they are delicate and have right tools and skills. It
> > was perfectly OK.  OTOH it didn't survive desoldering as I
> > was too lazy to change proper tips in hot tweezers or use flux
> > (you know I'm lazy from email sending habit nitpicking).
> > Today I did very short (less than 2h) test with C0G in place
> > and estimated tempco dropped to somewhere between 300 and
> > 500ppm. Next one to go is the trimmer, but it will take some
> > time. I'll probably do it together with V/oct conformance
> > test sometime in December. And you all are probably bored to
> > death with this thread anyway.   Roman  Dnia 29 listopada 2017
>
> Not at all, Roman. That bench testing is really great, unlike
> your email technique. Please keep it up. (The measurements, I
> mean, not the deplorable disregard for readability.)
>
> > 18:24 Jay Schwichtenberg <jschwich53 at comcast.net>
> > napisa??(a):  Roman,   You might want to do some research on
> > the ECH-U caps first.   These caps are made to be reflow
> > soldered but can be hand soldered with the  right tools and
> > skills. They are very delicate and can be easily melted when
> > soldering by hand.   Jay S.   -----Original Message-----
> > From: Synth-diy [mailto:synth-diy-bounces at synt On Behalf Of
> > Roman  Sowa  Sent: Wednesday, November 29, 2017 5:49 AM  To:
> > steve at bendentech.co.uk;   synth-diy at synth-diy.org  Subject:
> > [spam] Re: [sdiy] Those AS33xx chips again...    Currently
> > there is Panasonic ECH-U which is PPS film.
> > ______________________________  Synth-diy mailing list
> > Synth-diy at synth-diy.org  synth-diy.org synth-diy.org
>
> PS : I'm available for consultancy on email formatting. My rates
> are very reasonable. References on demand.
>
> --
> André Majorel http://www.teaser.fr/~amajorel/
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20171130/c19f90aa/attachment.htm>