[sdiy] New MIDI (was free AS3320, AS3340, AS3310 and AS3360 samples)

[Mikko Helin]

This is the proper link for CAN:

http://www.ucapps.de/midibox_network.html

--Mikko

On Thu, Nov 2, 2017 at 3:01 PM, Mikko Helin <maohelin at gmail.com> wrote:

> It would be nice if the CV and GATE signals on Eurorack bus were replaced
> with CAN. Midibox has already some implementation for CAN:
>
> http://www.ucapps.de/mbhp_iic_midi.html
>
> They have also an I2C MIDI module, I2C would be a cheaper bus for Euro.
>
> http://www.ucapps.de/mbhp_iic_midi.html
>
> --Mikko
>
>
> On Thu, Nov 2, 2017 at 2:18 PM, <paula at synth.net> wrote:
>
>> Gordon,
>>
>> yup, CAN is a good idea, still more pricey than regular serial (it's a
>> licensed technology IIRC) but WAY cheaper than ethernet :)
>>
>>
>>
>> On 2017-11-02 11:54, Gordonjcp wrote:
>>
>>> On Thu, Nov 02, 2017 at 11:34:27AM +0000, paula at synth.net wrote:
>>>
>>>> Gordon,
>>>>
>>>>  There's already a bunch of things going on with rtpMIDI and MIDI
>>>> over IP, to be honest my big problem is that it adds a huge cost to
>>>> small developers as they'll need a CPU/MCU capable of driving
>>>> ethernet and handling the ethernet Stack.
>>>>
>>>>  I was involved, whilst at Modal, with the MMA (working on the MPE
>>>> standard) but I know they were working on a MIDI V2, will be
>>>> interesting to see what approaches they take.
>>>>
>>>> Paula
>>>>
>>>
>>> Most decent modern microcontrollers have a couple of CANBus ports, which
>>> might be handy as a replacement for MIDI's physical interface?
>>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20171102/27f8372e/attachment.htm>