[sdiy] wireless patching

[Tom Wiltshire]

That doesn't sound too impossible given the 27MHz transmission frequency. The standard 50Hz PWM seems like a pretty light load for such a signal. How many channels can an RC controller handle? Are they multiplexed?

Tom

On 26 May 2017, at 17:49, Quincas Moreira <quincas at gmail.com> wrote:

> this is the direction I'm leaning towards!
> 
> "I hope it was clear that I wasn't saying one has to use existing RC radios
> and their standard sample rate (which is based on limitations of circuitry
> now decades obsolete).  The same general protocol could be implemented at
> a much higher sampling/repetition rate in a higher frequency band, and *if
> both are implemented at the same sample rate* it's hard for a digital
> packet protocol to beat it on latency." mscala at ansuz.sooke.bc.ca
> 
> 
> 
> On Fri, May 26, 2017 at 11:31 AM, <mskala at ansuz.sooke.bc.ca> wrote:
> On Fri, 26 May 2017, rsdio at audiobanshee.com wrote:
> > Another issue is that the RC solution is limited to a 50 Hz sample rate,
> > whereas the digital word protocol could manage a higher sample rate -
> 
> I hope it was clear that I wasn't saying one has to use existing RC radios
> and their standard sample rate (which is based on limitations of circuitry
> now decades obsolete).  The same general protocol could be implemented at
> a much higher sampling/repetition rate in a higher frequency band, and *if
> both are implemented at the same sample rate* it's hard for a digital
> packet protocol to beat it on latency.
> 
> --
> Matthew Skala
> mskala at ansuz.sooke.bc.ca                 People before principles.
> http://ansuz.sooke.bc.ca/
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> 
> 
> 
> -- 
> Quincas Moreira
> Test Pilot at VBrazil Modular
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170526/478458fa/attachment.htm>