[sdiy] pros and cons of SMT in DIY

[Chris Juried]

Looks like it took a while to put it together.  Why not use a premade DFN to DIP pcb. Handy little boards...

Sincerely, 

Chris Juried 
Audio Engineering Society (AES) Member 
InfoComm-Recognized AV Technologist
http://www.JuriedEngineering.com (Juried Engineering, LLC.)
http://www.TubeEquipment.com (Tube Equipment Corporation)
http://www.HistoryOfRecording.com (History of Recording)
http://www.linkedin.com/in/chrisjuried (LinkedIn)
Email: CJuried at yahoo.com 
Voice: (954) 478-4355 


This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any distribution or copying of this email, and any attachments thereto, is strictly prohibited. If you have received this email in error, please immediately notify me at (754) 300-9972 and permanently delete the original and any copy of any e-mail and any printout thereof. 
 
  On Wed, May 24, 2017 at 3:55 PM, Ingo Debus<igg.debus at gmail.com> wrote:   
> Am 24.05.2017 um 11:21 schrieb Roman Sowa <modular at go2.pl>:
> 
> Talking about crazy SMD prototyping, here's an example to what I did with 3x3mm 10-leads DFN package. I used thin magnet wire to actually add leads to it. When done, it looked like a cool little spider.
> http://www.synthdiy.eu/files/qfnwires.jpg

3 mm * 3 mm, so that’s 0.5 mm pitch? Kudos!
Which wire diameter is this? 0.1 mm or even thinner?

Ingo
_______________________________________________
Synth-diy mailing list
Synth-diy at synth-diy.org
http://synth-diy.org/mailman/listinfo/synth-diy
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170524/9aa57830/attachment.htm>