[sdiy] Favourite type of smd audio caps?
sleepy_dog at gmx.de
sleepy_dog at gmx.de
Fri May 19 22:55:52 CEST 2017
WIMA has some polypropylene SMD caps
http://www.wima.com/EN/products_smd.htm
Steve
> so, nobody ever chimed in here? I'm interested as well. I like
> Polypropilene and Mica for filters for example, but haven't been able
> to find them in SMT
>
> On Wed, Apr 5, 2017 at 12:33 PM, cheater00 cheater00
> <cheater00 at gmail.com <mailto:cheater00 at gmail.com>> wrote:
>
> Hi guys,
> What is your preferred type of smd capacitors for audio circuits?
> I don't mean oscillators (those get NP0/C0G caps), but all that
> other stuff, including amplifiers, filters, voltage rail
> decoupling, and ac coupling (output caps). I'm mainly interested
> in 0603, 0804, 1206 footprints.
>
> Obviously larger values might need to be (some form of) cans with
> smd footprint, so if you have a favourite of that type, mention
> that too.
>
> This is not about bypass capacitors used in digital circuits (eg
> the x7r kind).
>
> The main points for the smaller (0603-1206) caps might be:
>
> - available as smd, 0603 is best (this kind of parts is in a sweet
> spot being cheaper than larger or through-hole counterparts)
> - no microphonics
> - little temp co
> - low esr
> - available in relatively large-ish values (1206 if necessary)
> - low capacitance loss induced by dc bias
> - good for audio
> - not insanely expensive
>
> I'm interested in both your favourite dielectric type, and
> specific manufacturers or model families.
>
> What sorts of values do you normally use in those applications?
> (It's enough to mention ranges like "between .1 uF and 100 uF",
> listing every value would naturally be too much trouble for people
> answering)
>
> Thanks
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
> http://synth-diy.org/mailman/listinfo/synth-diy
> <http://synth-diy.org/mailman/listinfo/synth-diy>
>
>
>
>
> --
> Quincas Moreira
> Test Pilot at VBrazil Modular
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170519/da02e50d/attachment.htm>
More information about the Synth-diy
mailing list