[sdiy] temperature testing

[matt holland]

Thanks Ben, this looks like another good option.

mh

On Thu, May 11, 2017 at 3:10 AM, Ben Riggs <benalog1977 at gmail.com> wrote:

> Years back, doing my home brew beer I used the old fridge from the
> engineering common room at the local university I worked at at the time.
> The compressor worked but the thermostat didn't. Used a data logger (dt50)
> with a thermocouple to switch the compressor.
>
> BrewBeer fridge controllers can be cheap too, though I haven't brewed any
> beer in years.
>
> Sent from my iPhone
>
> > On 11 May 2017, at 3:15 pm, matt holland <matt at mattholland.org> wrote:
> >
> > searched a bit through the archives and didn't find anything so... how
> do you all go about testing your circuits over temperature? i imagine
> there's a decent amount of dust cleaner and hair dryers involved but i'm
> hoping some of you have some recommendations for something resembling a
> hobbyist budget temp chamber to make things a bit more objective and
> repeatable.
> >
> > mh
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at synth-diy.org
> > http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170511/a016293b/attachment.htm>