[sdiy] Original MS20 pitch tracking issue

[Kylee Kennedy]

You have the proper cabling? It needs a Y split TRS cable.

Kylee


On Tuesday, May 9, 2017, Roman <modular at go2.pl> wrote:

> If you are sure Analog Keys are sending proper scale (mesure it?) and it
> still does not play even intervals, then look for offsets between Keys and
> MS20 oscillator. Maybe during action with chainsaw something got damaged
> and there's huge DC offset added now. If that's the case you should notice
> better tracking in upper keys than in lower ones.
>
> You say "calibrated both oscillators", so what did you use as CV source
> during the process? I assume if it's rackmounted it has no keyboard.
>
> Roman
>
> Dnia 9 maja 2017 21:28 Douglas Hock <hockd654 at newschool.edu
> <javascript:_e(%7B%7D,'cvml','hockd654 at newschool.edu');>> napisał(a):
>
> Hi everyone,
>
> I recently purchased an ms20 that was sawed in half to be rackmounted, but
> abandoned as a project. I installed it into the rack, powered and wired it
> up, and revived it.
>
> Everything seems to work perfectly except for the pitch tracking on the
> oscillators. I'm sending HZ/V out of an Elektron Analog Keys (the racked
> ms20 has no keyboard) and it's tracking in uneven intervals. I have
> calibrated both oscillators with a tuner.
>
> I was wondering if anybody here had some recommendations on where and what
> to look for. I figure some of you might have seen this issue.
>
> Thanks!
> Doug
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> <javascript:_e(%7B%7D,'cvml','Synth-diy at synth-diy.org');>
> http://synth-diy.org/mailman/listinfo/synth-diy
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170509/ff3fb3ff/attachment.htm>