[sdiy] How to mount of module

[shine32]

Thanks so much.

I found a screw-in type nut.
Until now, because I was looking at a neighborhood shop, I was in 
trouble because there was only a thing to drive from the other side with 
a nut diameter of 4 mm or more.
With a hint of everyone's reply, I carefully searched and found 
something I wanted.

Atsushi Maeda

On 2017/05/01 8:37, Scott Gravenhorst wrote:
>
> For soft wood it is probably best that the drill diameter be the same as the screw shaft
> diameter.  The threading will be a little larger, but that's ok, that's what grabs and holds.
>
> shine32 <shine32 at kr.tcp-ip.or.jp> wrote:
>> Thanks so much for the wonderful information.
>> There are such parts.
>> I will look for it immediately.
>>
>> Atsushi Maeda