[sdiy] How to mount of module

[Scott Gravenhorst]

For soft wood it is probably best that the drill diameter be the same as the screw shaft
diameter.  The threading will be a little larger, but that's ok, that's what grabs and holds.

shine32 <shine32 at kr.tcp-ip.or.jp> wrote:
>Thanks so much for the wonderful information.
>There are such parts.
>I will look for it immediately.
>
>Atsushi Maeda
>
>On 2017/05/01 7:58, Mike Bachman wrote:
>> You can buy treaded brass inserts tgat are designed to be threaded into wood and
>> then accept a machine screw on their inner diameter.  This would alliw you to
>> remove and remount you modules as often as you like. You mark where you want you
>> mounting holes, then drill the recommended hole size for the insert. Screw in
>> the inset ant now you hace a nice permanent mounting hole.
>>
>> Powered by Cricket Wireless
>> On Apr 30, 2017 11:01 AM, Jarno Verhoeven <jarno.verhoeven at ziggo.nl> wrote:
>>
>>
>>     Drill first, that'll prevent splitting the wood rails.
>>
>>
>>     Verzonden vanaf mijn Samsung-apparaat
>>
>>
>_______________________________________________
>Synth-diy mailing list
>Synth-diy at synth-diy.org
>http://synth-diy.org/mailman/listinfo/synth-diy
>

-- ScottG
________________________________________________________________________
-- Scott Gravenhorst
-- http://scott.joviansynth.com/
-- When the going gets tough, the tough use the command line.
-- Matt 21:22