[sdiy] Roland M16C / M64C memory module - Connectors

[Gordonjcp]

On Tue, Jul 18, 2017 at 11:53:38PM +0200, sleepy_dog at gmx.de wrote:
> As for the contacts: I thought about making 1.0 or 1.6 mm card edge,
> and then solder thin brass plates on the pads to make them thicker
> (instead of tinning).
> If the receiving socket gives enough spring action...

If you've got a good CNC mill you could sweat a brass shim onto the
strip and then mill the slots in.

-- 
Gordonjcp MM0YEQ